Search found 10 matches

Actually it appears both of these URLs are for the substream - haven't figured out a way to use the mainstream yet

http://<ip addr>/Streaming/channels/1/httpPreview
http://<ip addr>/Streaming/channels/2/httpPreview

I have a TRENDnet TV-IP311PI camera which offers two video streams: a "main stream" and a "sub stream". The mainstream can only be configured to H.264. The substream can be H.264 or MJPEG -> however the substream wont support HD or the full capability of the camera, only the main...

This procedure may work for you - I finally had success with TRENDnet 311 this way I'm assuming your camera is similar, otherwise this wont make sense. 1.) first , go into the camera's settings. Go to Advanced:Video:Video format. Observe the two sets of parameters - one for the main stream, one for ...

quick additional note: Both these URL's will work with SH (main stream and sub stream) - see my other post from this thread



http://<ip addr>/Streaming/channels/1/httpPreview
http://<ip addr>/Streaming/channels/2/httpPreview

Ok it's been a small journey but things are mostly solved now. I didn't have any luck with the existing Trendnet profiles - for reasons I cannot explain the TV-IP311PI seems to be different from the others. I asked Trendnet customer support - ultimately they were quite helpful. So the following URL ...

Thank you for your reply. I tried the suggestions - including each of the pre-configured settings - but no luck. Each time after I click "Next" there is a short pause while it shows "connecting" and then it says "Could not connect" I triple/quadruple checked the camera ...

I ended up getting this one: http://www.trendnet.com/products/ip-cameras/TV-IP311PI which seems to be quite similar to the 310PI. however no luck with Sighthound. For those who got the 310 to work - can you please elaborate - does your sighthound login to the camera's admin user? or did you create a...

Just got a new TRENDnet TV-IP311PI. Based on posts I had the impression it would work with SH. Also, I upgraded our license to PRO so I could add this camera as our third camera (the other two are AXIS and work fine). Have been using SH for about a year with good results. Can't get this new one to w...

I made some progress on this - I carefully followed these instructions: http://www.ampercent.com/autostart-programs-after-system-boots-up-in-windows-10/13255/ Make sure you make the shortcut as they say, and select the "sighthouse video" executable when making the shortcut. This worked for...

Newbie forum member. Just built up a NUC system with Windows10 and Sighthound runs fine, but I would like it to auto-start on power-up. I read these instructions: https://www.sighthound.com/support/running-it-automatically-when-you-start-your-computer however despite being posted in March 2015, the ...