User confirmed cameras

[ryan]

These cameras and stream paths have been reported as working by users. They will make it into a future release of Sighthound Video, but until then you can select a mentioned compatible type or choose "Other IP camera" and manually enter the protocol and stream path.

Axis M7014
Protocol: http
Stream Path: /axis-cgi/mjpg/video.cgi?camera=[CHANNEL]

Deecam D200 IP
Protocol: rtsp
Stream Path: /11

FDT FD7901
Protocol: rtsp
Stream Path: /11

FDT FD7902
Protocol: rtsp
Stream Path: /11

Hamlet CS-5699F8
Protocol: http
Stream Path: /video.cgi

Honeywell IPCAM-WI2
Protocol: http
Port: 554
Stream Path: /img/video.asf

Lorex LNB2153B
Protocol: rtsp
Stream Path: /

TRENDnet TV-VS1P
Protocol: rtsp
Stream Path: /mpeg4

[csst]

Does Kare IP CAMERA (N5402JV N5403JV N7205JV) work with your software?

[catwatcher]

My Loftek 2200 - works fine. It is an obvious Foscam clone (but not a rip-off / fake).

In the first setup page:

• Camera type: Network (IP) camera
• Manufacturer: Foscam

And in the next setup page:

• Camera type: Foscam (other)
• You have to supply IP address, user name, and password.

[neilmc]

I bought a couple of DB Power IP cameras from an Australian eBay seller for $60 each. They are a pan/tilt wifi/ethernet camera.

They appear to be a Foscam clone and work fine by chosing the first Foscam camera from the list.

[ryan]

Thanks for letting us know Neil. Checking their site I assume you have the IP030? I'd be happy to add that to the list.

[neilmc]

Sorry, yes it is the IP030 (or it seems to be just looking at the website).

The box and camera don't have a model number on them. There's a sticker that says series B on the base. The supplied software wouldn't work with the camera (I tried Series B in their camera dropdown and then tried all of the others).

Vitamin D has been working flawlessly with it though

[John Cooper]

I have a WANSVIEW NCB-541W and the Streaming url is http://IP:port/videostream.cgi

John Cooper

[JohannesL]

Hi,

Brickcom bullet cameras WOB-100Ap and WOB-130Np work just fine....

Johannes

[ryan]

Hi Johannes,

What settings did you use to access these cameras?

[JohannesL]

Hi Johannes,

What settings did you use to access these cameras?

Hi,

In Vitamin, RSTP with port forwarding. 1280x1024 resolution. Also other options work without problems.

Those cameras are already more than a year old models. Unfortunately VitaminD is useless with the latest Brickcom WOB-300-Np.

Regards
Johannes