Thanks Devin,
I'll take a look at the logs in the next few days as time allows.
If I find anything I'll let everybody know, if not I'll raise a ticket.
Lets try and pin this bu**er down.......
Roy
Every few days "cannot connect to camera," needs restart
Moderator: Staff
32 posts
• Page 4 of 4 • 1, 2, 3, 4
-
Rodbolt - Posts: 4
- Joined: Mon Jun 08, 2015 6:15 pm
Re: Every few days "cannot connect to camera," needs restart
Hi there Devin and everybody else.
With reference to this problem, I've looked through the logs, and I cannot see anything that is happening at the same time that I loose connection to my camera - But I may just be missing it, as there are a lot more log entries than I though there would be and I may well be looking at the wrong ones.....
HOWEVER.....
I have made a change, and it seems to have worked.
Before I changed router / ISP (ie when system was stable) SH did not list my camera (Escam QD300) so I manually entered the stream path (sourced from the internet) as
":554//user=*****&password=*****&channel=1&stream=0.sdp" (without the quotes, and ***** are my logon details)
When I came to set the camera up with the new router, SH was now listing my camera by ip address on the "Camera setup" page, so I just chose it by the tickbox. The stream path was then filled in as
"Profile_0000:H264, 1280x720 (rtsp://195/168/***/***/user " but then I can't see or access the rest of it, but I suspect it's the same as above.
To me, the only real difference seems to be the "554" bit before "user..." but seeing as I just copied it verbatim, I don't know what it signifies.
I'm not knowledgeable enough to interpret these, so I can't be definitive, but (at the moment, it seems stable, with no disconnections....)
Please, anyone with greater knowledge, your thoughts are welcome.
Roy
With reference to this problem, I've looked through the logs, and I cannot see anything that is happening at the same time that I loose connection to my camera - But I may just be missing it, as there are a lot more log entries than I though there would be and I may well be looking at the wrong ones.....
HOWEVER.....
I have made a change, and it seems to have worked.
Before I changed router / ISP (ie when system was stable) SH did not list my camera (Escam QD300) so I manually entered the stream path (sourced from the internet) as
":554//user=*****&password=*****&channel=1&stream=0.sdp" (without the quotes, and ***** are my logon details)
When I came to set the camera up with the new router, SH was now listing my camera by ip address on the "Camera setup" page, so I just chose it by the tickbox. The stream path was then filled in as
"Profile_0000:H264, 1280x720 (rtsp://195/168/***/***/user " but then I can't see or access the rest of it, but I suspect it's the same as above.
To me, the only real difference seems to be the "554" bit before "user..." but seeing as I just copied it verbatim, I don't know what it signifies.
I'm not knowledgeable enough to interpret these, so I can't be definitive, but (at the moment, it seems stable, with no disconnections....)
Please, anyone with greater knowledge, your thoughts are welcome.
Roy