FDT FD7903 Setup
Moderator: Staff
3 posts
• Page 1 of 1
-
N7AS - Posts: 6
- Joined: Mon Apr 17, 2017 10:34 pm
FDT FD7903 Setup
I have an FDT FD7903 PTZ Outdoor IP Cam. I am using the FREE version of Sighthound as I only have one camera. It was working ok till a week ago when it could not connect to my camera. I have to use the Manual set-up as my camera is not on the list. I tried to edit my settings and it still could not see my camera. I removed the camera and tried again. It is asking for a path for the video stream. How do I find this path?
-
kgonzalez - Posts: 56
- Joined: Wed Nov 29, 2017 2:34 pm
Re: FDT FD7903 Setup
Hey N7AS,
To find the stream path of your camera you can usually contact the manufacturer of the camera or look at the camera's manual. These manuals have the stream information for the cameras which should include the stream path. Another method would be to search google with the following "FDT stream path" this should result in forums or web pages that could contain that information.
However, it seems that if you are using the rtsp settings to set up the camera in Sighthound Video, then the stream path should be "/11".
To find the stream path of your camera you can usually contact the manufacturer of the camera or look at the camera's manual. These manuals have the stream information for the cameras which should include the stream path. Another method would be to search google with the following "FDT stream path" this should result in forums or web pages that could contain that information.
However, it seems that if you are using the rtsp settings to set up the camera in Sighthound Video, then the stream path should be "/11".
-
N7AS - Posts: 6
- Joined: Mon Apr 17, 2017 10:34 pm
Re: FDT FD7903 Setup
The rtsp using /11 worked.
Thanks
Thanks