Reolink Support

[JesseS]

I searched and did not find it so you can add Reolink RLC-410 to the list of supported cameras, and by extension all Reolink IP cams should work. SH picked up the ONVIF camera at once, and all functions seem to work fine. This is a 4K camera with very good night vision @ a great price point.

* Forgot to mention that the one way audio works fine also.

[Kbond]

Hello,

You can try adding this camera manually. You can find instructions on how to do that at the link below:

https://www.sighthound.com/support/manu ... mera-setup

You can use the following data to set your camera up:

Camera Type: Other IP camera
Protocol: RTSP
Port: Leave Blank
Stream Path: /h264Preview_01_main

Can you please give that a try and let us know if you continue to have issues, thank you!

Regards,
-Kevin

[drifterific]

I have 6 of these cameras running on Sighthound and they work perfectly.

Mine show up when you add a camera ad IPC-BO IPC-122 [ONVIF] without me needing to go through and manually specify the IP address.

The caveat is that before trying to add the cameras I went through each camera individually updated the firmware to the latest and configured static IP Addresses for each of the cameras.

[dharammohali]

I have tried it with 4 Reolink cameras and it works fine and as you rightly mentioned This is a 4K camera with very good night vision @ a great price point . Had an issue with this twice but i got in touch with http://www.Reolink-support.com and got it fixed.

[Bob126]

You can try adding this camera manually

[tmrws]

I also have this camera setup, Reolink RLN8-410 and am unable to get all the cameras working with Sighthound.

I was able to get one camera working using the IP Address of the NVR but do not know how to get the other 3 cameras connected. So far I've contacted support from Sighthound, Reolink and my internet provider.

I am on a iMac running Sierra 10.12.6

The Reolink Client is running on my mac and works fine with all 4 cameras.