Trivision NC-250W
Moderator: Staff
3 posts
• Page 1 of 1
-
coltsmd - Posts: 2
- Joined: Wed Aug 30, 2017 7:08 pm
Trivision NC-250W
I am having issues setting up a Trivision camera. Does anyone have the stream path that can be used to complete setup?
-
Devin - Posts: 719
- Joined: Wed Mar 12, 2014 5:48 pm
Re: Trivision NC-250W
Hi coltsmd,
I did some searching and believe one of the following should work:
Protocol: RTSP
Port: <leave empty>
Stream Path: /live/0/h264.sdp
I saw the port 8150 referenced for RTSP in the manual, so you may need to enter this for the port. If that does not work, please log on to the camera's configuration web page, go to Camera > Stream Setup, take a screenshot of the page and send it in to [email protected]. this page should contain stream URL's that we can use to connect.
Regards,
-Devin
I did some searching and believe one of the following should work:
Protocol: RTSP
Port: <leave empty>
Stream Path: /live/0/h264.sdp
I saw the port 8150 referenced for RTSP in the manual, so you may need to enter this for the port. If that does not work, please log on to the camera's configuration web page, go to Camera > Stream Setup, take a screenshot of the page and send it in to [email protected]. this page should contain stream URL's that we can use to connect.
Regards,
-Devin
-
coltsmd - Posts: 2
- Joined: Wed Aug 30, 2017 7:08 pm
Re: Trivision NC-250W
Devin-
It worked! FYI, I did not have to put the port information in.
Thank you!!!!!
It worked! FYI, I did not have to put the port information in.
Thank you!!!!!