I can't seem to get Swann CONVR-B163MP / NVR-167090 NVR to work with Sighthound. Does Sighthound support this device?
I want to test it out before purchasing Sighthound. Thanks!
Swann CONVR-B163MP / NVR-167090
Moderator: Staff
2 posts
• Page 1 of 1
-
Devin - Posts: 719
- Joined: Wed Mar 12, 2014 5:48 pm
Re: Swann CONVR-B163MP / NVR-167090
Hello NPG,
I wasn't able to find the stream settings for this specific NVR, but I did find the settings for similar models which may also work. Please select "Other IP Address" during the camera setup and use the following settings to add each camera:
Protocol: rtsp
Port: <leave empty>
Stream Path: /Streaming/Channels/1
Note that the "1" at the end of the stream path is an example for camera 1 on your system. You should be able to substitute this number for any other camera on your system.
Regards,
-Devin
I wasn't able to find the stream settings for this specific NVR, but I did find the settings for similar models which may also work. Please select "Other IP Address" during the camera setup and use the following settings to add each camera:
Protocol: rtsp
Port: <leave empty>
Stream Path: /Streaming/Channels/1
Note that the "1" at the end of the stream path is an example for camera 1 on your system. You should be able to substitute this number for any other camera on your system.
Regards,
-Devin