I have a number of Dahua cameras and I'm having trouble getting Sightound to pickup the higher resolutions. The Dahua transmit both a Main Stream and a Sub Stream. The Sub Streams are low resolution (highest is 704x576, which works)but if I "un-enable" the Sub Stream in the camera, Sighthound fails to connect, even when setting the Main Stream on the camera to a supported Sighthound stream such as SXGA. Any ideas?
Thanks,
Steve
Changing Resolution Issue
Moderator: Staff
4 posts
• Page 1 of 1
-
Devin - Posts: 719
- Joined: Wed Mar 12, 2014 5:48 pm
Re: Changing Resolution Issue
Hello Steve,
Most cameras that have a main and sub stream have separate url's for each stream. I'd be happy to investigate this camera if you could provide the model number of this Dahua.
Regards,
-Devin
Most cameras that have a main and sub stream have separate url's for each stream. I'd be happy to investigate this camera if you could provide the model number of this Dahua.
Regards,
-Devin
-
stevegricer - Posts: 2
- Joined: Mon Jan 11, 2016 7:31 pm
Re: Changing Resolution Issue
Devin,
Many thanks. Model is IPC-HFW4300S-V2.
This is the stream path I've ben using: rstp://192.168.18.210/cam/realmonitor?c ... &subtype=1
Regards,
Steve
Many thanks. Model is IPC-HFW4300S-V2.
This is the stream path I've ben using: rstp://192.168.18.210/cam/realmonitor?c ... &subtype=1
Regards,
Steve
-
Jmtyra - Posts: 16
- Joined: Tue Jan 19, 2016 1:05 pm
Re: Changing Resolution Issue
[Posting for reference in case anyone else has a Dahua (or similar) DVR system.]
Change the subtype=1 to subtype=0 to connect to the main stream output. 0 = main stream, 1 = sub stream. My Dahua system functions this way.
Change the subtype=1 to subtype=0 to connect to the main stream output. 0 = main stream, 1 = sub stream. My Dahua system functions this way.