Works with Zxtech (mcl28y9)
Moderator: Staff
4 posts
• Page 1 of 1
-
Devin - Posts: 719
- Joined: Wed Mar 12, 2014 5:48 pm
Re: Works with Zxtech (mcl28y9)
Hello davidrt,
I did some research and believe I've found the correct settings for this camera. In the camera setup please select Other IP Address from the Camera Type drop-list and enter the following:
Protocol: rtsp
Port: <leave empty>
Stream Path: /0
I've attached an image of how this should look once entered.
I did some research and believe I've found the correct settings for this camera. In the camera setup please select Other IP Address from the Camera Type drop-list and enter the following:
Protocol: rtsp
Port: <leave empty>
Stream Path: /0
I've attached an image of how this should look once entered.
- Attachments
-
Screen Shot 2015-10-26 at 3.34.33 PM.png- (54.19 KiB) Downloaded 313 times
-
davidrt - Posts: 5
- Joined: Mon Oct 26, 2015 5:20 am
Re: Works with Zxtech (mcl28y9)
Hi Devin,
Thank you for the settings which also works fine. Not quite sure if there is an advantage using your settings
or the default when you add using ip address etc.
Thank you for the settings which also works fine. Not quite sure if there is an advantage using your settings
or the default when you add using ip address etc.