Hi guys,
Just purchased a few Deecam D200 IP cams from Amazon to replace my old Foscams 8120s. Working great in the browser but I can't seem to get them connected through the generic IP cam template in the Sighthound camera setup to record. Can anyone please help? Thanks.
Deecam D200 H.264
Moderator: Staff
3 posts
• Page 1 of 1
-
Devin - Posts: 719
- Joined: Wed Mar 12, 2014 5:48 pm
Re: Deecam D200 H.264
Hi bwood15,
I did some research on this model and believe I've found the correct stream settings. Please select "Other IP Camera" from the Camera Type drop list and enter the following:
Protocol: rtsp
Port: <leave empty>
Stream Path: /11
If that does not work please submit a bug report so we can take a look at your logs for anything unusual. To submit a bug report go to Help > Report a Problem.
Regards,
-Devin
I did some research on this model and believe I've found the correct stream settings. Please select "Other IP Camera" from the Camera Type drop list and enter the following:
Protocol: rtsp
Port: <leave empty>
Stream Path: /11
If that does not work please submit a bug report so we can take a look at your logs for anything unusual. To submit a bug report go to Help > Report a Problem.
Regards,
-Devin
-
bwood15 - Posts: 19
- Joined: Fri Jan 04, 2013 12:41 pm
Re: Deecam D200 H.264
Worked perfectly Devin. Thanks for the super quick response time!
Brandon
Brandon